- Home
- ยป
- Our Product Range
- »
- Glow Wire Test Apparatus
Glow Wire Test Apparatus
Glow Wire Tester
Minimum Order Quantity: 1 Piece
Type Of Testing Machines | PLASTICS TESTING |
Usage/Application | Glow wire Test apparatus |
Color | Blue |
Size | STANDARD |
Brand | Kwality Instruments |
Country of Origin | Made in India |
Our Glow Wire Test Apparatus is fully automated, controlled by microcontroller.
You only should set:
- The temperature test.
- The time test
- The observation time.
- Put the sample in the car and press the Start button.
Nickel / Chromium based heating element (glow wire)
Cr/Al based fine wire based thermocouple for temperature sensing
Temperature Range - Adjustable up to 960° centigrade
A motorized sliding carrier with an universally adjusted SS perforated tray is provided to mount the specimen
Self adjusting constant current mode operation as soon as heater-specimen contact is established
Motor brings the jig back to the pre-test position automatically as soon as the test is concluded
Time Controller - Micro-controller based programmable timer 0 to 999secPrecision scale: Precision scale is provided to measure the height of the flame
Safety – Emergency Switch, MCB, Fuses Entire panel hoisted in aluminium sections for better aesthetics
Fully Automated Panel
Additional Information:
- Delivery Time: 10
Endurance Test Setup For MCB And RCCB
Minimum Order Quantity: 1 Sample
Type Of Testing Machines | Endurance Test Setup for MCB and RCCB |
Usage/Application | Endurance Testing Machines |
Color | Blue |
Digital Timer And Counter | Yes |
Brand | Kwality Instruments |
Country of Origin | Made in India |
Kwality Instruments Endurance Test Bench is designed for electrical and mechanical endurance MCB and RCCB as per clause 9.11 of IEC 60898-1. The source and the load is designed to comply as per the general test conditions specified in Cl 9.11.1. The accompanying pneumatic fixture is designed to hold custom built designs of MCB and RCCB while the microcontroller based timer unit can be configure to follow test procedure summarized in Cl 9.11.2. In addition, the user can configure some other test settings with respect to the on time, off time as well as the number of test cycles.
The pneumatic test fixture is designed in such a way that the user can test MCBs of similar designs but having dimensions to a different degree. Thus, the test bench is ideal for test labs where MCBs of different brands (and hence different dimensions) can be tested. In addition, if the user is a MCB / RCCB / RCBO manufacturer, the fixture can be customized to hold more that one kind of circuit breaker.
Specifications:
Input 380 / 415 440 V, 50 / 60 Hz (User Specified), 3 phase, 100 A continuous
Load Current: 0.5 A to 100 A
Pneumatic Pressure required: 6 Bar
Metering:
Micro-Controller based Programmable Timer
3 phase digital ammeter
3 phase digital voltmeter
3 phase digital power factor meter
Electro Magnetic Counter: To count the number of operations
Ratings of MCB covered: 0.5, 1, 1.6,2, 3, 4, 6, 8, 10, 13, 16, 20, 25, 32, 40, 45, 50, 63A, 80A, 100A select able with Shorting Links
Glow Wire Test Apparatus
Minimum Order Quantity: 1 Piece
Usage/Application | Fire Reterdant Test |
Color | Blue |
Power Supply | 230 V |
Digital Timer And Counter | Yes |
Brand | Kwality Instruments |
Country of Origin | Made in India |
FEATURES
- Easy to install
- Less maintenance requirement
- Designed as per industrial standards
- Dimensional accuracy
- Trouble free performance
Glow Wire Test Apparatus.
TECHNICAL SPECIFICATION
- Glow wire: Nickel / Chromium wire (80/20) of 4 mm diameter
- Thermocouple: Fine wire chrome/alumni thermocouple of approximately 0.5 mm diameter
- Temperature range: Ambient to 999°C
- Temperature control: Digital temperature controller having a resolution of 1°C. Accuracy within + 10°C for temperatures up to 750°C, and within + 15°C for temperatures above 750°C
- Timer: Digital timer of range 99.9 shaving a resolution of 0.1 s, with three displays and push button controls to indicate various times
- Depth of penetration of glow wire: Mechanically limited to 7 mm
- Load on test specimen: Between 0.8 and 1.2 N, applied through dead weights
Testing Machines Glow Wire Test Apparatus
Minimum Order Quantity: 1 Piece
Brand | Kwality Instrument |
Temperature Range | AMBIENT- 1200 DEGREE |
Material | MS |
Frequency | 50/60 Hz |
Display | Digital |
Voltage | 230 V |
Country of Origin | Made in India |
GLOW WIRE TESTER APPARATUS
GLOW WIRE TEST Apparatus is designed to carry out fire hazard testing as specified in IEC 60695-2-10 2000-10. Flammability test is to check the ‘Resistance to Fire’ of electrical insulators that touch directly conducting parts & also parts of insulators. Testing with regard to fire hazards can be done by creating exactly the conditions occurring in practice. However, this is not possible in most instances. Hence for this test, the actual conditions are simulated as closely as possible by the glow wire tester. This test is also referred in many other standards such as IS 11000, IS 3854 : 1997 / IS 1293 :1988 / IS 371 :1999 & IS 11000 Pt 2 Sec 1, IEC 60335, IEC 884/94, IEC 60598, IEC 61058, BS 6458, BS EN 60695 – 2-10,11,12.
Glow Wire Test Apparatus
GLOW WIRE TESTER is designed to carry out fire hazard testing as specified in IEC 60695-2-10 2000-10. Flammability test is to check the ‘Resistance to Fire’ of electrical insulators that touch directly conducting parts & also parts of insulators. Testing with regard to fire hazards can be done by creating exactly the conditions occurring in practice.
Additional Information:
- Production Capacity: 10-MONTH
- Delivery Time: 7 DAYS
- Packaging Details: WOODEN BOX
Needle Flame Test Apparatus
Minimum Order Quantity: 1 Piece
Type Of Testing Machines | Needle Flame Test |
Usage/Application | Needle Flame Testing Machine |
Color | White |
Micro Controller Based | Test time for temperature to increase from 100 Degree C +/- 5 Degree C to 700 Degree C +/- will be 23.5+/- 1 s. |
Brand | Kwality Insturments |
Enclosure | 0.5 cubic meter internal volume. |
Country of Origin | Made in India |
Needle Flame Test Apparatus system will be specially designed to carry out Test as per IEC 60695-11-5
1- PLC to control the sequence of operation and display the Test Results.
2- Ball Screw Type sliding mechanism for vertical and horizontal movement.
-
Enclosure with 0.5 cubic meter internal volume.
-
Bunsens Burner with 0.9 mm diameter with regulator and needle flame diameter 0.5.
-
Test time for temperature to increase from 100° C +/- 5° C to 700° C +/- will be 23.5+/- 1 s.
-
Test time in second.
-
Draught Free Condition.
-
Observation of test from outside from mirror.
-
Chamber from inside should be dark.
-
Exhaust to remove product of combustion.
-
Timing device tolerance not more than 0.5s.
-
Needle Flame Test Apparatus :- the system will be specially designed to carry out tester as per iec 60695-11-5
Additional Information:
- Delivery Time: 25 DAYS
- Packaging Details: WOODEN BOX
HMI Based Glow Wire Test apparatus
Minimum Order Quantity: 1 Piece
Usage/Application | Glow wire Test apparatus |
Color | Grey |
Digital Timer And Counter | Yes |
Brand | Kwality Instruments |
Grade | Automatic |
Temperature Range | Ambient To 960 DegreeC |
Standard | IEC 60695-2-10,ASTM D6194,UL746A |
Country of Origin | Made in India |
Main features of the equipment
1. Fully automatic
2. Standard component
3. Glass window
Specification
a c Fully automatic
a c Display Touch screen HMI base.
a c Tip, Nickel/Chromium wire (80-20) of 4mm diameter.
a c Range of Temperature a Ambient to 960 A C.
a c PLC Base Variable Current Source up to 230v A.C. 50Hz Sec: - 5v/500v, (150A)..
a c 0.5 mm Dia a Type Ka Thermocouple, Inconel sheathed for using at high temperature.
a c PLC base counter panel with Digital temperature Controller PID-1000A C with resolution of 1A C.
a c Digital Timer range 99.9/sec for trolley travelling regarding to test time automatic with a Speed of 25 mm / sec.
a c Trolley as per your sample
a c Scales for measuring penetration of the tip and height of the flame
a c Pre-set weight for setting the pressure of tip contacts.
a c Cabinet of 0.5 cubic meter with exhaust fan as per new standard
a c Complete equipment powder coating.
a c Silver calibration 2mm X 2mm X 0.06mm
Glow wire Test Apparatus
Minimum Order Quantity: 1 Piece
Usage/Application | Laboratory |
Color | White |
Surface Finishing | Color Coated |
Brand | Kwality |
Frequency | 50 Hz |
Country of Origin | Made in India |
We ensure to provide good quality products to our customers.